2011 Subaru Impreza Owner's Manual - Page 37

1-6 Seat, seatbelt and SRS airbags Seat heater (if equipped) The seat heater is equipped in the front seats. The seat heater operates when the ignition switch is either in the "Acc" or "ON" position. & Type A seat heater To turn on the seat heater, push the "LO" or "HI" position on the switch, as desired, depending on the temperature. Selecting the "HI" position will cause the seat to heat up quicker. To turn off the seat heater, slightly press the opposite side of the current position. The indicator located on the switch illuminates when the seat heater is in operation. When the vehicle's interior is warmed enough or before you leave the vehicle, be sure to turn the switch off. CAUTION . There is a possibility that people with delicate skin may suffer slight burns even at low temperatures if they use the seat heater for a long period of time. When using the heater, always be sure to warn the persons concerned. . Do not put anything on the seat which insulates against heat, such as a blanket, cushion, or similar items. This may cause the seat heater to overheat. & Type B seat heater NOTE Use of the seat heater for a long period of time while the engine is not running can cause battery discharge. 1) 2) 3) A) B) HI - Rapid heating LO - Normal heating OFF - Off Left-hand side Right-hand side Each seat heater has four levels of adjustment. To use the heater in the right-hand seat, turn the "R" adjustment dial forward until the " " mark reaches the