2007 Volvo C70 Owner's Manual - Page 159

After use, return the tire sealing system to its storage compartment behind the ski hatch in the center of the rear seat backrest. WARNING If you interrupt your trip for more than one hour, check the inflation pressure in the damaged tire again before continuing. See the section "Stage 2: Checking inflation pressure" on page 154. Replacing the sealing compound container The sealing compound container must be replaced if: the tire sealing system has been used to repair a tire the container's expiration date has passed (see the date on decal 1). After use, the container (6), its retaining bracket (9), and the hose (10) must be replaced. Please consult your Volvo retailer for replacement parts. See also the safety regulations on the bottom of the container. WARNING Be sure that the compressor is not connected to a 12-volt socket while replacing the container. 175 07 Wheels and tires Tire sealing system Replacing the container and hose after use 1. Unscrew the two screws (2) on the orange casing. 2. Remove the speed limit sticker (4) and the expiration date decal (1). 3. Release the safety catch (5) and remove the casing (3) from the sealing system unit. 4. Press down the button (8) while twisting the container (6) and retaining bracket (9) clockwise approximately 2/ 3 of a turn and remove them. 5. To remove the hose (10), first press it into housing and then pull it out from the opposite side. 6. Wipe away any remaining sealing compound, or scrape it off if it has already hardened. 7. Insert a new air hose and check that it is properly seated.