3Com 2226 PWR User Guide - Page 41

Configuring PoE 41 Figure 20 PoE Configuration Summary Screen You can configure two basic PoE settings in the Switch Configuration section: ■ Power ■ Power Exceed Shutdown Method Table 12 describes the available options for these settings. Table 12 Basic PoE Options Option Description Power Enables and disables Power over Ethernet on all ports. There are two available options for this setting: ■ Enable - Select to enable the Switch to supply PoE on all ports ■ Disable - Select to disable PoE on all ports To enable or disable power for individual ports, you need access the PoE Setting screen. For more information, refer to "Configuring PoE for Individual Ports" on page 41. Shutdown Power Method If the power budget is exceeded, this setting determines which devices will continue to be powered. You can select: ■ Last Link Up (default) - Ensures that the devices have power priority in the order in which they were connected to the switch. ■ Select Port Priority - Follows the port priority settings to allow devices configured as having low priority to be disconnected first. If you make any changes to the settings in Table 12, click Apply to save your changes. Configuring PoE for Individual Ports You can also configure the PoE settings for each individual port using the PoE Setting screen.