3Com 3C17400 User Manual - Page 18
Default Settings, Subnet Mask - default ip address
View all 3Com 3C17400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
18 CHAPTER 1: INTRODUCING THE SWITCH 3812 AND SWITCH 3824 Default Settings Table 5 shows the default settings for the Switch: Table 5 Default Settings Feature Switch Automatic IP Configuration Enabled Port Status Enabled Port Speed 10/100/1000 Mbps ports are auto-negotiated Duplex Mode 10/100/1000 Mbps ports are auto-negotiated Flow Control ■ Enabled in half duplex ■ Auto-negotiated in full duplex Broadcast Storm Control Enabled Virtual LANs (VLANs) All ports belong to the untagged Default VLAN (VLAN 1) with IEEE Std 802.1Q-1998 learning operational Link Aggregation Control Protocol (LACP) Disabled per port IP Multicast Filtering Filtering enabled Rapid Spanning Tree Protocol Enabled Spanning Tree Fast Start Enabled Traffic Prioritization All ports prioritize NBX VoIP traffic (LAN and IP). All ports set to "best effort" for all other traffic. Port Security Disabled per port If you initialize a Switch unit by selecting System > Control > Initialize in the Web interface or by entering system control initialize in the Command Line Interface, the following settings are retained to allow you to connect to and manage the Switch: ■ IP Address ■ Subnet Mask ■ Default Router