3Com 3C17400 User Manual - Page 35
admin, protocol ip basicConfig, manual, gettingStarted, Methods of, Managing a Switch
View all 3Com 3C17400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 35 highlights
Manually Configuring IP Information 35 2 At the login and password prompts, enter admin as your user name and press Return at the password prompt. If you have logged on correctly, the top-level menu of the command line interface is displayed as shown in the example in Figure 8. Figure 8 Example top-level command line interface menu 3 At the Select menu option prompt you can either: ■ enter the protocol ip basicConfig command. At the Enter configuration method prompt enter manual. The screen prompts you to enter IP information. or ■ enter the gettingStarted command. At the Enter configuration method prompt enter manual. The screen prompts you to enter IP information. 4 Enter the IP address, subnet mask, and gateway IP address for the Switch. The screen displays a summary of the information entered. If using the gettingStarted command you will then be prompted to enter system information, change passwords, and then given the option to carry out advanced configuration. The initial set up of your Switch is now complete and the Switch is ready for you to set up your chosen management method. See "Methods of Managing a Switch" on page 39. If you do not intend to use the command line interface via the console port to manage the Switch, you can disconnect the serial cable and close the terminal emulator software.