3Com 3C17400 User Manual - Page 40
SNMP Management, Setting Up Command Line Interface Management, CLI Management via the Console Port
View all 3Com 3C17400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 40 highlights
40 CHAPTER 3: SETTING UP FOR MANAGEMENT Figure 13 Web interface management over the network Refer to "Setting Up Web Interface Management" on page 42. SNMP Management You can manage a Switch using any network management workstation running the Simple Network Management Protocol (SNMP) as shown in Figure 14. For example, you can use the 3Com Network Supervisor software that is provided on the CD-ROM that accompanies your Switch. Figure 14 SNMP management over the network Refer to "Setting Up SNMP Management" on page 43. Setting Up Command Line Interface Management This section describes how you can set up command line interface management using a local console port connection or over the network. CLI Management via To manage a Switch using the command line interface via the local the Console Port console port connection: 1 Ensure you have connected your workstation to the console port correctly as described in "Connecting to the Console Port" on page 33. 2 Your Switch is now ready to continue being managed and/or configured through the CLI via its console port.