3Com 3C17400 User Manual - Page 30
Setting Up Overview, are contained in the s that follow. In brief, you need - default ip
View all 3Com 3C17400 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
30 CHAPTER 3: SETTING UP FOR MANAGEMENT Setting Up Overview This section gives an overview of what you need to do to get your Switch set up and ready for management when it is in its default state. The whole setup process is summarized in Figure 6. Detailed procedural steps are contained in the sections that follow. In brief, you need to: ■ Configure IP information manually for your Switch or view the automatically configured IP information ■ Prepare for your chosen method of management Figure 6 Initial Switch Setup and Management Flow diagram Power Up the Switch. Plug and Play Setup Initial IP Information Setup IP Information is automatically configured. See page 31 Do you want to manually Yes configure the IP information? No How do you want to connect to the Switch? How do you want to view the automatically configured IP information? Connect to a front network port and use the Web Interface or Command Line Interface. See page 33 Connect to the console port and use the Command Line Interface. See page 33 Use 3Com Network Supervisor (3NS). See page 36 Connect to the console port and use the Command Line Interface. See page 36 Feature Management How do you want to manage your Switch? See Command Line Interface SNMP See Connect via the console port. See Connect over the network via Telnet. See page 41 Web Interface Connect over the network. See