3Ware 9500S-8MI Installation Guide - Page 28
To connect the multi-lane cables, When the cable is inserted correctly, you will feel it click into - 8 sata raid controller
UPC - 693494950816
View all 3Ware 9500S-8MI manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
Installing the Hardware Figure 6. Multi-lane Cable (InfiniBand 4x, SFF-8470) For use with a backplane that has individual SATA connectors or individual serial ATA drives, use the break-out cable, which has a multi-lane connector on one end, and four individual SATA connectors on the other end. To connect the multi-lane cables Depending on the model of the controller and the number of drives you will be connecting, you will connect two or three multi-lane cables. Each cable supports up to four serial ATA ports. 1 Connect each interface cable to a multi-lane connector on the controller. See Figure 5. When the cable is inserted correctly, you will feel it click into place. 2 If your enclosure has a backplane, connect the other end of each interface cable to the backplane. If you are using a standard enclosure, connect each of the individual SATA connectors to a drive. 20 3ware 9000 Series Serial ATA RAID Controller Installation Guide