AEG BCS551020M User Manual - Page 30

Oven ceiling, Removing and installing, the door

Get AEG BCS551020M PDF manuals and user guides View all AEG BCS551020M manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

30 www.aeg.com WARNING! Keep children away when you clean the oven at a high temperature. The oven surface becomes very hot and there is a risk of burns. Before activating the catalytic cleaning remove all the accessories from the oven. Turn the oven light on. The fan cover with a catalytic coating is self-cleaning. It absorbs fat which collects on the walls while the appliance operates. To support the self-cleaning procedure, heat the empty oven on a regular basis. 1. Clean the oven floor with warm water and washing up liquid, then dry it. 2. Set the function . 3. Set the oven temperature to 250 °C and let the oven operate for 1 hour. 4. When the appliance is cool, clean it with a soft and moist sponge. 10.7 Oven ceiling WARNING! Deactivate the appliance before you remove the heating element. Make sure that the appliance is cold. There is a risk of burns. Remove the shelf supports. You can fold down the heating element on the oven ceiling to clean the oven ceiling easily. 1. Hold the heating element with two hands at the front. 2. Pull it forwards against the spring pressure and out of two holders. The heating element folds down. 3. Clean the oven ceiling. 4. Install the heating element in the opposite sequence. Install the heating element correctly above the supports on the inner walls of the appliance. 5. Install the shelf supports. 10.8 Removing and installing the door You can remove the door and the internal glass panels to clean it. The number of glass panels is different for different models. WARNING! Be careful when you remove the door from the appliance. The door is heavy. 1. Open the door fully. 2. Fully press the clamping levers (A) on the two door hinges. A A 3. Close the oven door to the first opening position (approximately 70° angle). 4. Hold the door with one hand on each side and pull it away from the appliance at an upwards angle.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
WARNING!
Keep children away when
you clean the oven at a high
temperature. The oven
surface becomes very hot
and there is a risk of burns.
Before activating the
catalytic cleaning remove all
the accessories from the
oven.
Turn the oven light on.
The fan cover with a catalytic coating is
self-cleaning. It absorbs fat which collects
on the walls while the appliance
operates.
To support the self-cleaning procedure,
heat the empty oven on a regular basis.
1.
Clean the oven floor with warm water
and washing up liquid, then dry it.
2.
Set the function
.
3.
Set the oven temperature to 250 °C
and let the oven operate for 1 hour.
4.
When the appliance is cool, clean it
with a soft and moist sponge.
10.7
Oven ceiling
WARNING!
Deactivate the appliance
before you remove the
heating element. Make sure
that the appliance is cold.
There is a risk of burns.
Remove the shelf supports.
You can fold down the heating element
on the oven ceiling to clean the oven
ceiling easily.
1.
Hold the heating element with two
hands at the front.
2.
Pull it forwards against the spring
pressure and out of two holders.
The heating element folds down.
3.
Clean the oven ceiling.
4.
Install the heating element in the
opposite sequence.
Install the heating element
correctly above the supports
on the inner walls of the
appliance.
5.
Install the shelf supports.
10.8
Removing and installing
the door
You can remove the door and the
internal glass panels to clean it. The
number of glass panels is different for
different models.
WARNING!
Be careful when you remove
the door from the appliance.
The door is heavy.
1.
Open the door fully.
2.
Fully press the clamping levers (A) on
the two door hinges.
A
A
3.
Close the oven door to the first
opening position (approximately 70°
angle).
4.
Hold the door with one hand on each
side and pull it away from the
appliance at an upwards angle.
www.aeg.com
30