AEG BCS551020M User Manual - Page 33

Service data

Page 33 highlights

ENGLISH 33 Problem Possible cause Remedy There is no good cooking You did not fill the cavity performance using the True embossment with water. Fan Cooking PLUS function. Refer to "Activating the True Fan Cooking PLUS function". You want to activate the True Fan Cooking function, but the indicator of the Plus Steam button is on. The True Fan Cooking PLUS function operates. Push the Plus Steam button to stop the True Fan Cooking PLUS function. You want to activate the cleaning function, but the display shows "C4". The Plus Steam button is pressed in. Press the Plus Steam button again. The water in the cavity embossment does not boil. The temperature is too low. Set the temperature at least to 110 °C. Refer to "Hints and tips" chapter. The water comes out of the There is too much water in cavity embossment. the cavity embossment. Deactivate the oven and make sure that the appliance is cold. Wipe the water with a cloth or sponge. Add the correct amount of water to the cavity embossment. Refer to the specific procedure. The appliance is activated and does not heat up. The fan does not operate. The display shows "Demo". The demo mode is activated. 1. Deactivate the oven. 2. Press and hold the but- ton . 3. The first digit on the dis- play and Demo indicator start to blink. 4. Enter the code 2468 by pressing the buttons or to change the val- ues and press to confirm. 5. The next digit starts to blink. 6. Demo mode deactivates when you confirm the last digit and the code is correct. 11.2 Service data If you cannot find a solution to the problem yourself, contact your dealer or an Authorised Service Centre. The necessary data for the service centre is on the rating plate. The rating plate is on the front frame of the appliance cavity. Do not remove the rating plate from the appliance cavity.

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36

Problem
Possible cause
Remedy
There is no good cooking
performance using the True
Fan Cooking PLUS function.
You did not fill the cavity
embossment with water.
Refer to "Activating the True
Fan Cooking PLUS func-
tion".
You want to activate the
True Fan Cooking function,
but the indicator of the Plus
Steam button is on.
The True Fan Cooking PLUS
function operates.
Push the Plus Steam button
to stop the True Fan
Cooking PLUS function.
You want to activate the
cleaning function, but the
display shows "C4".
The Plus Steam button is
pressed in.
Press the Plus Steam button
again.
The water in the cavity em-
bossment does not boil.
The temperature is too low.
Set the temperature at least
to 110 °C.
Refer to “Hints and tips”
chapter.
The water comes out of the
cavity embossment.
There is too much water in
the cavity embossment.
Deactivate the oven and
make sure that the appliance
is cold. Wipe the water with
a cloth or sponge. Add the
correct amount of water to
the cavity embossment. Re-
fer to the specific procedure.
The appliance is activated
and does not heat up. The
fan does not operate. The
display shows
"Demo"
.
The demo mode is activa-
ted.
1.
Deactivate the oven.
2.
Press and hold the but-
ton
.
3.
The first digit on the dis-
play and
Demo
indicator
start to blink.
4.
Enter the code 2468 by
pressing the buttons
or
to change the val-
ues and press
to con-
firm.
5.
The next digit starts to
blink.
6.
Demo
mode deactivates
when you confirm the
last digit and the code is
correct.
11.2
Service data
If you cannot find a solution to the
problem yourself, contact your dealer or
an Authorised Service Centre.
The necessary data for the service centre
is on the rating plate. The rating plate is
on the front frame of the appliance
cavity. Do not remove the rating plate
from the appliance cavity.
ENGLISH
33