AEG BP8715001M Product Manual - Page 17

end time in approximately 30 minutes. 6. Make sure that the core temperature sensor stays in the meat and in the core temperature sensor socket during the cooking. 7. If necessary, you can set a new core temperature during the cooking. To do this, touch . 8. When the meat is at the set core temperature, an acoustic signal sounds. The appliance deactivates automatically. ENGLISH 17 Touch a sensor field to stop the signal. 9. Remove the core temperature sensor plug from the socket . Remove the meat from the appliance. WARNING! The core temperature sensor is hot. There is a risk of burns. Be careful when you remove the tip and plug of the core temperature sensor. 9.3 Telescopic runners °C 1. Pull out the right and left hand telescopic runners. 2. Put the wire shelf on the telescopic runners and carefully push them into °C the appliance. Make sure you push back the tele- scopic runners fully in the appliance before you close the oven door. Keep the installation instructions for the telescopic runners for future use. With telescopic runners you can put in and remove the shelves more easily. CAUTION! Do not clean the telescopic runners in the dishwasher. Do not lubricate the telescopic runners.