AEG BP8715001M Product Manual - Page 31

ENGLISH 31 13. WHAT TO DO IF... WARNING! Refer to the Safety chapters. Problem Possible cause Remedy The appliance does The appliance is deactiva- Activate the appliance. not heat up. ted. The appliance does The clock is not set. not heat up. Set the clock. The appliance does The necessary settings are Make sure that the settings not heat up. not set. are correct. The appliance does The Child Lock is activated. Refer to "Deactivating the not heat up. Child Lock". The appliance does The fuse is released. not heat up. Make sure that the fuse is the cause of the malfunction. If the fuse releases again and again, contact an authorized electrician. The display shows F111. The CT Sensor plug is not correctly installed into the socket. Put the plug of core temperature sensor as far as possible into the socket. The lamp does not The lamp is defective. operate. Replace the lamp. The display shows The test mode is activated. 1. Deactivate the appli- "Demo". The appli- ance. ance does not heat up. The fan does not operate. 2. Touch and hold until the appliance activates and deactivates. 3. Touch and hold and at the same time until an acoustic signal sounds and "d" goes out.