AIWA AWP-ZP5 Operating Instructions - Page 14

Manual tuning preset, Other operations, To improve tuner reception, To set CD power

Page 14 highlights

5 Press TUNER MEMORY. The preset number flashes. Perform steps 6 and 7 while the preset number flashes. Preset number 6 Press . or > repeatedly to select the desired preset number. 7 Press ENTER. 8 Repeat steps 2 through 7 to preset other stations. Tip Press x to stop scanning. Manual tuning preset You can manually tune in and store the radio frequency of the desired stations. 1 Press TUNER BAND (or FUNCTION repeatedly) to switch the function to tuner. 2 Press TUNER BAND repeatedly to select "FM" or "AM". 3 Press TUNING MODE repeatedly until "AUTO" and "PRESET" disappear from the display. 4 Press TUNING + or - repeatedly to tune in the desired station. 5 Press TUNER MEMORY. 6 Press . or > repeatedly to select the desired preset number. 7 Press ENTER. 8 Repeat steps 2 through 7 to preset other stations. Other operations To Do this Tune in a station Follow the procedure described with a weak signal in "Manual tuning preset" (page 14). Set another station to the existing preset number Start over from step 2. After step 5, press . or > repeatedly to select the preset number you want to store the station. To improve tuner reception When tuner reception is poor, set CD player power off by CD power manage function. CD power is factory set to on. 1 Press CD (or FUNCTION repeatedly). 2 Press ?/1 to turn off the system. 3 After "STANDBY" stops flashing, press and hold x then ?/1 on the unit. "CD POWER OFF" appears. To set CD power on Repeat the procedures above and "CD POWER ON" appears. Notes • When "CD POWER OFF" is selected, disc access time is increased. • You cannot change the setting in Power Saving Mode (page 20). 14GB

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

14
GB
5
Press TUNER MEMORY.
The preset number flashes. Perform steps 6
and 7 while the preset number flashes.
6
Press
.
or
>
repeatedly to select
the desired preset number.
7
Press ENTER.
8
Repeat steps 2 through 7 to preset
other stations.
Tip
Press
x
to stop scanning.
Manual tuning preset
You can manually tune in and store the radio
frequency of the desired stations.
1
Press TUNER BAND (or FUNCTION
repeatedly) to switch the function to
tuner.
2
Press TUNER BAND repeatedly to
select “FM” or “AM”.
3
Press TUNING MODE repeatedly until
“AUTO” and “PRESET” disappear from
the display.
4
Press TUNING + or – repeatedly to tune
in the desired station.
5
Press TUNER MEMORY.
6
Press
.
or
>
repeatedly to select
the desired preset number.
7
Press ENTER.
8
Repeat steps 2 through 7 to preset
other stations.
Other operations
To improve tuner reception
When tuner reception is poor, set CD player
power off by CD power manage function.
CD power is factory set to on.
1
Press CD (or FUNCTION repeatedly).
2
Press
?/1
to turn off the system.
3
After “STANDBY” stops flashing, press and
hold
x
then
?/1
on the unit.
“CD POWER OFF” appears.
To set CD power on
Repeat the procedures above and “CD POWER
ON” appears.
Notes
When “CD POWER OFF” is selected, disc access
time is increased.
You cannot change the setting in Power Saving
Mode (page 20).
Preset number
To
Do this
Tune in a station
with a weak signal
Follow the procedure described
in “Manual tuning preset”
(page 14).
Set another station
to the existing
preset number
Start over from step 2. After
step 5, press
.
or
>
repeatedly to select the preset
number you want to store the
station.