AIWA AWP-ZP5 Operating Instructions - Page 24
To verify the status of the, installed devices, Click [OK] to close the System Properties
View all AIWA AWP-ZP5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 24 highlights
5 Follow the instructions appearing on the monitor. 3 Click the [Device Manager] tab. Make sure that "View devices by type" is selected. 4 Make sure that the following items are listed in the "Device Manager" dialog box. • "USB Audio Device" under "Sound, video and game controllers" • "USB Composite Device" under "Universal Serial Bus controllers" The illustrations above show an example Windows Millennium Edition screen. Notes • The OS CD-ROM may be required depending on your computer. In this case, follow the instructions and set the CD-ROM in the drive. • Do not disconnect or connect the USB cable during detection. To verify the status of the installed devices Be sure to check the status of the installed devices after you have installed their drivers. 1 Open the [Control Panel]. In the Start menu, point to [Settings] and click [Control Panel]. 2 Double-click the [System] icon. The "System Properties" dialog box appears. Note (For Windows Me) If you cannot find the [System] icon, click "View all Control Panel options". 24GB The illustration above shows an example Windows Millennium Edition screen. Note If you do not see these items or if a "!" is displayed on top of any of the icons, it means the respective device driver is not installed or recognized by the OS. In this case, install the device driver again. 5 Click [OK] to close the "System Properties" dialog box. Notes • Other items in the "Device Manager" list may differ depending on your computer environment. • If the devices are not recognized, disconnect and reconnect the USB cable, and try to automatically install the drive drivers again. If the devices still are not recognized, reboot the computer.