AIWA AWP-ZP5 Operating Instructions - Page 9
Setting the clock, Getting Started
View all AIWA AWP-ZP5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Getting Started Setting the clock Use buttons on the remote for the operation. 1 Press ?/1 to turn on the system. 2 Press CLOCK/TIMER SET. 3 Press . or > repeatedly to set the hour. 4 Press ENTER. 5 Press . or > repeatedly to set the minute. 6 Press ENTER. The clock starts working. To adjust the clock 1 Press CLOCK/TIMER SET. 2 Press . or > until "CLOCK SET?" appears, then press ENTER. 3 Do the same procedures as steps 3 to 6 above. Notes • The clock settings are canceled when you disconnect the power cord or if a power failure occurs. • You cannot set the clock in Power Saving Mode (page 20). 9GB
Getting Started
9
GB
Use buttons on the remote for the operation.
1
Press
?/1
to turn on the system.
2
Press CLOCK/TIMER SET.
3
Press
.
or
>
repeatedly to set the
hour.
4
Press ENTER.
5
Press
.
or
>
repeatedly to set the
minute.
6
Press ENTER.
The clock starts working.
To adjust the clock
1
Press CLOCK/TIMER SET.
2
Press
.
or
>
until “CLOCK SET?”
appears, then press ENTER.
3
Do the same procedures as steps 3 to 6
above.
Notes
•
The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
•
You cannot set the clock in Power Saving Mode
(page 20).
Setting the clock