AIWA AWP-ZP5 Operating Instructions - Page 32
operate properly after performing, the above measures, reset
View all AIWA AWP-ZP5 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 32 highlights
Tuner Severe hum or noise/stations cannot be received. • Set the proper band and frequency (page 13). • Connect the antenna properly (page 8). • Find a place and an orientation that provide good reception, then set up the antenna again. If you cannot obtain good reception, we recommend you connect a commercially available external antenna. • The supplied FM lead antenna receives signals along its entire length, so make sure you extend it fully. • Keep the antennas away from the system and other components. • Consult your nearest Aiwa dealer if the supplied AM antenna has come off the plastic stand. • Try turning off surrounding electrical equipment. • Set "CD POWER OFF" by CD power manage function (page 14). A stereo FM program cannot be received in stereo. • Press FM MODE until "MONO" disappears in the display. Noise is heard while loading/removing a disc. • Change the location of the AM antenna. Personal computer (except for AWP-ZP1) There is no sound. • Connect the personal computer properly. • Press PC (or FUNCTION repeatedly) to select "PC" (page 26). • Select the standard audio device in the "Multimedia" or "Sounds and Multimedia" (for Windows 2000/Me/98 Second Edition) or "Sounds, Speech, and Audio Devices" (for Windows XP) on the Control Panel of the computer. Optional components There is no sound. • Refer to General item "There is no sound." (page 30) and check the condition of the system. • Connect the component properly (page 28) while checking: - if the cords are connected properly. - if the cord plugs are firmly inserted all the way. • Turn on the connected component. • Refer to the operating instructions supplied with the connected component and start playing. • Press FUNCTION repeatedly (or MD* on the unit) to select "MD" (page 29). * AWP-ZP1 only The sound is distorted. • Set the volume of the connected component lower. If the system still does not operate properly after performing the above measures, reset the system as follows: 1 Disconnect the power cord. 2 Reconnect the power cord. 3 Press ?/1 to turn on the system. 4 Hold down ?/1 and then press i-Bass on the unit for 2 seconds. The system is reset to the factory settings. You should set the settings you made, such as the preset stations, clock, and timer. 32GB