AIWA CA-DW635 Operating Instructions - Page 10

TAPE OPERATIONS 1 q Use Type I (normal) tapes only. q Tapes are played back" on one side only. ~ Press TAPE and press WA STOP/EJECT to open the cassette holder. Th Deck 1 ck 2 Insert a tape with the exposed side down and the side to be played facing out. Push the cassette holder to close. z Press F PLAY to start play. To stop play, press WA STOP/EJECT. To pause play, press 11 PAUSE. To resume play, press again. To fast forward or rewind, press > FF or + REW in stop mode. Then press WA to stop the tape. To start play when the power is off (Direct Play Function) Press b PLAY. The power is turned on and play of the inserted tape begins. \ About cassette taDes q To prevent accidental erasure, break off the plastic tabs on the cassette tape with a screwdriver or other aI.@j) pointed tool after recording. "" \ \QSide A Tab for side A After play on deck 2 finishes, play on deck 1 will start without interruption. During play on deck 2, press II PAUSE then press F PLAY on deck 1. 11 PAUSE on deck 1 will be released at the end of play on deck 2. To record on the tape again, cover the tab openings with adhesive tape, etc.  120-minute or longer tapes are extremely thin and easily deformed or damaged. They are not recommended. q Take up any slack in the tape with a pencil or similar tool before use. Slack tape may break or jam in the mechanism. 1() ENGLISH