AIWA CA-DW635 Operating Instructions - Page 14

SETTING THE TIMER 1 2,3 To check the specified time Press TIMER. The timer-on time and the duration for the timer-activated period flash for 4 seconds. To cancel timer standby mode temporarily Press TIMER twice to turn off 0. Using the unit while the timer is set You can use the unit normally after setting the timer. Before turning off the power, repeat step 4 to prepare the source, and adjust the volume. The unit can be turned on at a specified time every day with the built-in timer. Set the timer as follows while the power is on. Preparation Make sure the clock is set correctly. 1 Press TIMER to display ~, and press 11 SET within 4 seconds. O and the hour flash. q Timer playback will not begin unless the power is turned off . q Connected equipment cannot be turned on and off by the built-in timer of this unit. Use an external timer. m If you do not press II SET within 4 seconds, another operation may start. 2 Designate the hour of the timer-on time by pressing + or >, and 1I SET. Repeat to designate the minute of the timer-on time. 3 Select the duration for the timer-activated period with + or -, and press 11 SET. The duration for the timer-activated period can be set between 5 and 240 minutes in 5-minute steps. 4 Prepare the source. To listen to a CD, press CD and load the disc. To listen to the radio, press TUNER/BAND and tune to a station. 5 Press POWER to turn the unit off after adjusting the volume. 0 remains on the display after the power is turned off (timer standby mode). When the timer-on time is reached, the unit turns on and begins play with the selected source. The volume level is automatically set to 21 when the power is turned off with the volume level set to 22 or more. 14 ENGLISH