AIWA CA-DW635 Operating Instructions - Page 15

SETTING THE SLEEP TIMER 1 -2 MICROPHONE MIXING The unit can be turned off automatically at a specified time. I Press SLEEP. Connect a microphone with a mini plug to the MIC jack. Prepare a source to be mixed and play it. Adjust the volume of the microphone with MIC VO-L and the source to be mixed with VOLUME. z Within 4 seconds, press+ or -to specify the time until the power is turned off. Each time the button is pressed, the time changes between 5 and 240 minutes in 5-minute steps. To record the microphone mixing sound Insert a cassette to be recorded on into deck 1 and press q REC. Specified time To check the time remaining until the power is turned off Press SLEEP once. The remaining time is displayed for 4 seconds. . During dubbing at high speed, the microphone mixing sound is not recorded. q If a microphone is placed too close to the speaker, a howling sound (feedback) may be produced. If this happens, move the microphone away from the speaker or decrease the main volume.  The use of a unidirectional type microphone is recommended to prevent howling. u To cancel the sleep timer Press SLEEP twice to turn off SLEEP on the display. m q If you press SLEEP while the power is off, the power is turned on and the sleep timer works directly so that the unit will be turned off after 60 minutes. To specify the time until the power is turned off, press SLEEP once again then press < or > within 4 seconds. q If the unit is turned off during tape playback, > PLAY on the decks will not be released. Press WA STOP/EJECT to release b PLAY. ENGLISH 15