AIWA CX-NHMT75 Operating Instructions - Page 11

SOUND STORING THE NEW EQUALIZATION CURVES DSP SURROUND The DSP (Digital Signal Processor) SURROUND adjusts the delay time, the input mode and the feedback level to give a resonant surround sound, allowing you to enjoy the real sound presence of different environments. This unit has been programmed with 5 different SURROUND modes. SELECTING A PROGRAMMED DSP SURROUND MODE Up to 5 customized equalization curves can be stored as the manual modes M1 - M5. 1 Go through steps 1-4 of "Setting a New Equalization Curve Manually". The created curve is displayed for 8 seconds. 2 Within 8 seconds, press ENTER. "M 1" flashes on the display for 8 seconds. • If this step is not completed within 8 seconds, press GEQ first to display "GEQ ON". Then within 4 seconds press ENTER repeatedly until "M1" flashes. 3 Within 8 seconds, turn MULTI JOG to select one of the manual modes M1 - M5 to store the curve. 4 Within 8 seconds, press ENTER. The new equalization curve is stored. To select the stored equalization curve Press GEQ, and turn MULTI JOG to select one of the manual modes M1 - M5 within 4 seconds. To adjust the volume of the surround speakers Press MANUAL SELECT twice or three times on the remote control. "S-L" or "S-R" is displayed for 4 seconds. Press f DOWN or g UP on the remote control within these 4 seconds. • The DOLBY PRO LOGIC (page 21) and the DOLBY DIGITAL SURROUND (page 29) surround speakers level is also changed. The DSP SURROUND mode is canceled when: - the ECHO level is changed. - the DOLBY PRO LOGIC is turned on. - the headphones are plugged in. - the 5.1 CH (page 29) is selected. Five modes of DSP SURROUND offer the sound presence you'd experience in disco (DISCO), at a live concert (LIVE), stadium (STADIUM), in a concert hall (HALL) or movie theater (MOVIE). En (Shown in parentheses are indications appearing in the display.) Press SURROUND, and turn MULTI JOG or press f or g repeatedly to select the desired Programmed mode within 4 seconds. "DSP SURROUND" appears and the DSP SURROUND mode is displayed cyclically as follows. DISCO LIVE STADIUM HALL MOVIE Equalization curves are selected automatically to match the DSP SURROUND modes and can also be selected or turned off to suit your preference. To display the current DSP SURROUND mode Press SURROUND. The current mode is displayed for 4 seconds. To cancel the selected mode Press SURROUND twice. "DSP OFF" appears and "DSP SURROUND" disappears. When the music source is monaural Select "LIVE", "MOVIE" or "STADIUM" to obtain a simulated stereo effect. When "DISCO" or "HALL" is selected, no sound will be heard from the surround speakers. ENGLISH 11