AIWA CX-NHMT75 Operating Instructions - Page 7
Before Operation
View all AIWA CX-NHMT75 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 7 highlights
PREPARATIONS BEFORE OPERATION 1 Press ECO. "ECO MODE" will be displayed. 2 Press ENTER within 4 seconds. The current power-economizing mode status will be displayed. 3 Turn MULTI JOG within 4 seconds to select one of the power-economizing modes. Example : When "ECO ON" is selected. To turn the power on Press one of the function buttons (TAPE/DECK 1/2, TUNER/ BAND, VIDEO/AUX/5.1CH, CD, MD). Playback of the inserted disc or tape begins, or the previously tuned station is received (Direct Play Function). POWER is also available. When the power is turned on, the disc compartment may open and close to reset the unit. To turn the power off Press POWER. DEMO(Demonstration) When the AC cord is plugged into an AC outlet for the first time after purchase, the DEMO will begin in the display. When the power is turned on, the DEMO will end. When the power is turned off, the DEMO will begin again. When the clock is set, the DEMO will not begin even if the power is turned off. To deactivate or activate DEMO Press CLOCK, and clock is displayed in place of the DEMO. Press DEMO to activate. (For more about the DEMO, see page 27) SETTING POWER ECONOMIZING MODE When you set power economizing mode to "ECO ON" or "ECO AUTO", the unit reduces power consumption by conducting four ECO operations as follows. ECO ON • The unit (all the illumination of the display and the buttons) blacks out when the power is turned off. Only the red indicator lights up. • If DIMMER (1-3) is selected, the illumination of the display and the buttons brighten for 10 seconds only when you press a button or turn VOLUME or MULTI JOG. • The display dimmer mode is set to the dimmest, the button illumination lights off, and the volume is set to the minimum (0) when the unit turns on by timer recording. ECO AUTO • In addition to the three operations of ECO ON, the unit automatically turns itself off if you do not operate it and the sound source is mute for 10 minutes. ECO OFF The power economizing mode does not function. 4 Press ENTER within 4 seconds. If the clock is not set, the unit does not black out. Instead, the DEMO will begin when the power is turned off. DIMMER MODE To change the display dimmer mode 1 Press ECO repeatedly until "DIM MODE" is displayed. 2 Within 4 seconds, press ENTER. 3 Within 4 seconds, turn MULTI JOG to select one of the dimmer modes changed cyclically as below. En 4 Within 4 seconds, press ENTER. DIM-OFF DIMMER 1 DIMMER 2 DIMMER 3 "DIM-OFF" mode is the brightest and "DIMMER 3" mode is the dimmest. In "DIMMER 3" mode, the spectrum analyzer, the window of the unit top, and the button illumination light off in addition. FLASH WINDOW The window on the top of the unit lights up or flashes and the inside of the cassette holders light up while the unit is being powered on. To turn off the light of the top window, press s while pressing CD. To turn off the light inside2 the cassette holders, press s while pressing TAPE. To turn either light back on, repeat the operation, respectively. 7 ENGLISH