AIWA CX-NHMT75 Operating Instructions - Page 28

OTHER CONNECTIONS CONNECTING OPTIONAL EQUIPMENT SUBWOOFER JACKS Connect an optional powered subwoofer with a built-in amplifier to either of the two SUBWOOFERS jacks. 5.1 CH INPUT JACKS This unit can input sound signals from the audio equipment (DVD player, LD player, etc.) that contains a Dolby Digital decoder with the 5.1 ch output terminals. Refer to "CONNECTING A DVD PLAYER" on page 29. Refer to the operating instructions of the connected equipment for details. • The connecting cords are not supplied. Obtain the necessary connecting cords. • Consult your local Aiwa dealer for optional equipment. VIDEO/AUX JACKS This unit can input analog sound signals through these jacks. Use a cable with RCA phono plugs to connect audio equipment (turntables, LD players, MD players, VCRs, TV, etc.). Connect the red plug to the VIDEO/AUX R jack, and the white plug to the VIDEO/AUX L jack. When connecting a turntable Use an Aiwa turntable equipped with a built-in equalizer amplifier. MD JACKS This jack is recommended to connect with an MD player. Use a cable with RCA phono plugs. Connect the red plug to the MD R jack, and the white plug to the MD L jack. LINE OUT JACKS This unit can output analog sound signal through these jacks. Use a cable with RCA phono plugs to connect audio equipment with LINE IN (analog input) jacks. Connect the red plug of a cable to LINE OUT R jack, and the white plug to LINE OUT L jack. Do not connect an equipment to LINE OUT jacks and VIDEO/ AUX jacks simultaneously. Otherwise, noise is generated and malfunction occurs. CD DIGITAL OUT (OPTICAL) JACK This unit can output CD digital sound signals through this jack. Use an optical cable to connect digital audio equipment (DAT deck, MD recorder, etc.). Remove the dust cap a from the CD DIGITAL OUT (OPTICAL) jack. Then, connect an optical cable plug to the CD DIGITAL OUT (OPTICAL) jack. LISTENING TO EXTERNAL SOURCES To play equipment connected to VIDEO/AUX jacks or MD jacks, proceed as follows. 1 Press VIDEO/AUX/5.1CH or MD. To play the equipment connected to VIDEO/AUX, press VIDEO/AUX/5.1CH. "VIDEO" appears on the display. To play the equipment connected to MD, press MD. "MD" appears on the display. 2 Play the connected equipment. To change a source name in the display When VIDEO/AUX/5.1CH is pressed, "VIDEO" is displayed initially. It can be changed to "AUX" or "TV". With the power on, press POWER while pressing VIDEO/AUX/5.1CH. Repeat the procedure to select one of the names. To adjust the sound level of the external source When the sound level of the external source is much higher or much lower than that of other function sources, adjust it as follows. 1 Press VIDEO/AUX/5.1CH or MD and play the equipment. 2 Press f or g so that the sound level becomes the same as that of other function sources. During recording, the sound level can not be adjusted. When the CD DIGITAL OUT (OPTICAL) jack is not being used Attach the supplied dust cap. 28 ENGLISH