AIWA XP-R100 Operating Instructions - Page 10
BEFORE, PLAYBACK, Turning, >0, Standby, Adjusting, sound, Inserting, remove
View all AIWA XP-R100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 10 highlights
0 DSL • (( 2 cc.,•••.14/ O 10 .VOLUME • 3 CD '*" 75 7 23' BEFORE PLAYBACK English Turning on and off ->0 Turning the power on Press PLAY/PAUSE. Power is turned on and playback starts. Note "Err" appears on the display when you play a disc placed upside-down or a defective disc. Turning off the power If no new operations are done within 30 seconds from the end of last operation, the power is turned off automatically. (Auto power off function) • You can turn off the power by pressing the • STOP/ OFF/CHARGE before it is automatically turned off. Standby mode ->0 When an operation finishes, the unit goes into standby mode until the auto power off function automatically turns off the power. To enter standby mode, press HI PLAY/PAUSE to start playback, then press • STOP/OFF/CHARGE. Adjusting the sound -+ 0 Volume Turn the VOLUME control to adjust the volume. DSL Press DSL for more powerful sound and deeper bass. DSLO : Deep bass is emphasized. DsLop : Deep bass is strongly emphasized. DSL : Normal sound Inserting a disc -> 0 1 Slide the OPEN switch to open the disc compartment. 2 Place a disc in the center with the label side facing up. 3 Close the disc compartment. ® Total number of tracks ® Total playing time To remove the disc -> Pick up the disc, holding its edge, while pressing the pivot gently.