AIWA XP-R100 Operating Instructions - Page 8
Using, Rechargeable, Batteries, House, Current, Before, Playback
View all AIWA XP-R100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 8 highlights
0 -"NA. DC 6V a STOP/OFF/CHARG OFF..:NaSME USING ON RECHARGEABLE English BATTERIES • Be sure to use size AA Ni-Cd 1.2 V 700 mAh rechargeable batteries, which are commercially available. • Be sure to read the instructions of the purchased rechargeable batteries before use. • When using on the rechargeable batteries for the first time, charge them until the battery indicators go out. • Before charging the batteries, close the disc compartment. You cannot charge the batteries while it is opened. 1 Insert the rechargeable batteries with the 0 and 0 marks correctly aligned. 2 Connect the AC adaptor. © to DC 6 V jack ® to wall outlet 3 Keep • STOP/OFF/CHARGE pressed for about 1 second to start charging. "C-on" appears, and OPE/BATT indicators * light. When charging is completed, "C-OFF" flashes a few times, and the OPE/BATT indicators go out. After charging, disconnect the AC adaptor. Time to recharge the batteries Recharge the batteries when E (red) lights. If the unit remains in use after E (red) lights, "Lo-bAtt" appears (during CD operation only) and the current operation stops. To stop charging Press • STOP/OFF/CHARGE during charging. USING ON AC HOUSE CURRENT Connect the supplied AC adaptor in the same way as recharging the batteries. During operation on AC house current, all of the OPE/ BATT indicators light. BEFORE PLAYBACK HOLD switch -> Release the HOLD switch before playback. -3. ® When not using the unit, set the HOLD switch to the HOLD position. Accidentally pressed button will not function. -30. (9 If buttons are pressed when the HOLD switch is set to HOLD position, "HOLd" flashes in the display.