AIWA XP-R100 Operating Instructions - Page 18
Radio, Reception
View all AIWA XP-R100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
1 ■STOP/OFF/ CHARGE 1 IVAIER ON aAlvo 2 0 FM MONO/ST 2 90.55 AM AM STEP 9kHz 10kHz RADIO RECEPTION English Tuning in to a station 1 Press TUNER ON/BAND repeatedly to select AM or FM. 2 Press TUNING + (10101) or - (IN) to tune in to a station. After listening, press ■ STOP/OFF/CHARGE to turn off the radio. For quick tuning Keep either TUNING + (NI) or - (IN) pressed for about 1 second. When a station is tuned in to, the frequency stops automatically. However, it does not stop if the broadcast signal is weak. For better reception -> 0 FM: The headphone cord functions as the FM antenna. Keep it extended. AM: Turn the unit to find the position which gives the best reception. To listen to an FM stereo broadcasting When a tuned in station is in stereo, STEREO changes to a.rW,,' . When the FM stereo signal is weak and distorted, press MONO/ST. STEREO goes out and the sound will be heard in monaural but distortion will be reduced. Note • Do not open the disc compartment during radio reception. The buttons will be deactivated. • The power is turned off automatically if no operation is made after 90 minutes from the last operation during radio reception. AM steps -> 0 Radio broadcasts have different frequency ranges and changes in different steps in different countries. This unit is factory-set to 10 kHz steps on AM. When using the unit where the AM step changes to 9 kHz, set the AM STEP switch on the inner side of the disc compartment to 9 kHz. 18