Aastra 5380ip User Manual Aastra 5380/5380ip (Office 80/80IP) - Page 88
Activating/Deactivating Functions by Remote Control
View all Aastra 5380ip manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 88 highlights
Operator Console Properties of a two-company system: • Each individual Line key allows you to appear as Company A or B. • Call lists are not kept separately according to company. • The call charges are recorded separately for each company. • A substitution will apply equally to both companies. To phone on behalf of Company A: Press a free Line key once. ➯ The Line key lights up. The line is selected. To phone on behalf of Company B: Press a free Line key twice. ➯ The Line key lights up. The line is selected. Enter the phone number of the user. ➯ You will appear to the person either as Company A or B and transmit the corresponding phone number. ■ Activating/Deactivating Functions by Remote Control You are not at your desk and want to set various functions on your phone from a different phone. You can activate/deactivate many of your phone's functions by remote control from a different phone. Remote control has to be enabled for your phone in the system. The remote control is initiated using a special */# procedure. You can then enter the function commands and */# procedures. Using remote control from a third-party phone: 1. Enter */# procedure #06. 2. Enter your phone number. 3. Enter your PIN. 4. Enter the */# procedure for activating/deactivating the function you want. Pick up the handset. ➯ You hear the acknowledgement tone. Put the handset on-hook. ➯ The function is now activated/deactivated. Note: The factory setting "0000" is not accepted. First change the PIN as described in chapter "Changing the PIN", page 63 or use */# procedure *47 (see ""User's Guide */# Procedures""). If you have forgotten your PIN, your system administrator can reset it to the factory setting. 88 eud-0850/2.1 - I7.7 - 10.2008