Aastra 9133i 9133i User Guide - Page 22

Programmable Keys Configuring Park/Pickup Use the following procedure to configure park/pickup on the 9112i phone. Aastra Web UI 1. Click on Operation-> Programmable Keys and XML. . 2. Pick a programmable key to configure for parking a call and picking up a call. 3. In the "Type" field, select Park. Select Pickup for the other programmable key. 4. In the "Value" fields, enter the approriate values based on the server in your network. Note: For values to enter in this field, see the table "Park/Pickup Call Server Configuration Values" on page 15. 5. In the "Line" field, select the lines for which to apply the Park and pickup configuration. 6. Click changes. to save your 7. Click on Operation->Reset. 8. In the "Restart Phone" field click phone. to restart the IP Using the Park Call/Pickup Parked Call Feature Use the following procedure on the IP phone to park a call and pick up a parked call. Park a Call 1. While on a live call, press the "Park" softkey. 2. Perform the following for your specific server: For Asterisk Server - Server announces the extension number where the call has been parked. Once the call is parked, press the Nkey to complete parking. For BroadWorks Server - After you hear the greeting from the CallPark server, enter the extension where you want to park the call. For Sylnatro Server - Enter the extension number where you want to park the call, followed by "#" key. For ININ Server - Enter the extension number where you want to park the call, followed by "#" key. If the call is parked successfully, the response is either a greeting voice confirming that the call was parked, or a hang up occurs. The parked call party will get music on hold. 3. If the call fails, you can pick up the call (using the next procedure) and press the "Park" softkey again to retry step 2. 16 9133i IP Phone User Guide