Acer Altos 600 Acer Altos 600 User's Guide - Page 111
Advanced Configuration Options, When you select Advanced Configuration Options
![]() |
View all Acer Altos 600 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
97 SCSI controller, the Start Unit Command is sent to the next highest SCSI ID with a setting of yes. The process continues until all supported devices respond to the SCSI controller. If many drives are set to yes for Send Start Unit Command, the boot time varies depending on how long it takes each drive to spin up Advanced Configuration Options When you select Advanced Configuration Options, the Advanced Configuration Options a screen appears. The default values for the AIC 7899 SCSI Advanced Configuration are: Advanced Configuration Default Value Reset SCSI Bus at IC Initialization Enabled Display Ctrl A Message During BIOS Initialization Enabled Extended BIOS Translation for DOS Drivers > 1 G byte Enabled Verbose/Silent Mode Verbose Host Adapter BIOS Enabled Support Removable Disks Under BIOS as Fixed Disks Enabled BIOS Support for Bootable CD-ROM Enabled BIOS Support for Int13 Extensions Enabled Do not change the default values in this screen unless absolutely necessary. Host Adapter BIOS This option enables or disables the SCSI controller BIOS. The default setting is Enabled. The SCSI controller BIOS must be enabled if you want the computer to boot from a SCSI hard disk drive connected to the SCSI controller. Several SCSISelect options cannot be used unless the SCSI controller BIOS is enabled.
![](/manual_guide/products/acer-computers-altos-600-acer-altos-600-users-guide-17dd826/111.png)