Acer Altos 600 Acer Altos 600 User's Guide - Page 94

80 Chapter 4 BIOS Utility Parameter Console redirection Hidden partition Communication protocol COM port baud rate Remote console phone no. Description Option This parameter lets you enable or disable the connection to the RDM manager station. If enabled and conditions are met, the RDM enabled server automatically dials the RDM manage station using the phone number specified in the Remote Console Phone No. parameter when the server reboots. Once the connection is established, both the RDM server and RDM manager station display the same screen which enables the RDM manager station to function the same as the server console. Setting this to Disabled deactivates the RDM manager station Disabled Enabled If you want the hidden partition to become accessible, set this parameter to Enabled. When enabled, the server boots to the hidden partition Disabled Enabled This parameter specifies the parity, stop bits, and data length for the COM port to be used for the RDM connection. This is fixed at N(none), 8, 1 setting and is non-configurable N, 8, or 1 This parameter lets you set the transfer rate of the COM for the RDM connection. The parameter setting depends on your modem specification; therefore, before you change the setting of this parameter, check your modem user guide 9600 57600 This parameter allows you to set the phone number of the RDM manager station that the RDM module must dial once RDM is activated and the Remote Console is enabled. To set, simply highlight the parameter and enter the Remote Console phone number. If the remote console phone number is using X line, then you must enter six commas (,) after the phone number and before the extension number, if any. When entering the extension number, we recommend that you insert a comma after each number. The commas specify delay. If this parameter is left blank, the Remote Console calling function is disregarded. User input