Actiontec V1000H User Manual - Page 55

Remote GUI, Apply

Get Actiontec V1000H PDF manuals and user guides View all Actiontec V1000H manuals
Add to My Manuals
Save this manual to your list of manuals

Page 55 highlights

Wireless VDSL Modem Router Remote GUI The Remote GUI screen allows you to setup the Modem Router so that it can be accessed from a remote location. To use: 1. Click Remote GUI from the menu on the left side of any Advanced Setup screen. The Remote GUI screen appears. 2. Click in the Enable radio button next to Remote GUI to activate. 3. Enter a user name and password in the appropriate text boxes beneath step 2. 4. Set the remote management port. It is set to port 443 by default. If the remote management port number has been changed, you will need to use the URL "https://" followed by the Modem Router's IP address, a colon (:), then the port number to which the remote management port was changed. Example: https://192.170.1.1:234. 5. Select the remote management timeout. If you select one of the time periods provided in the drop-down list, remote management of the Modem Router will stop after the selected time period, if no actions are detected. 6. Click Apply to save your changes. 52

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
52
Wireless VDSL Modem Router
Remote GUI
The Remote GUI screen allows you to setup the Modem Router so that it can be
accessed from a remote location. To use:
Click
1.
Remote GUI
from the menu on the left side of any Advanced Setup
screen. The Remote GUI screen appears.
Click in the
2.
Enable radio button next to Remote GUI to activate.
Enter a user name and password in the appropriate text boxes beneath step 2.
3.
Set the remote management port. It is set to port 443 by default. If the remote
4.
management port number has been changed, you will need to use the URL
“https://” followed by the Modem Router’s IP address, a colon (:), then the port
number to which the remote management port was changed.
Select the remote management timeout. If you select one of the time periods
5.
provided in the drop-down list, remote management of the Modem Router will
stop after the selected time period, if no actions are detected.
Click
6.
Apply
to save your changes.