Actiontec V1000H User Manual - Page 9
Line Port, HPNA Port, LAN Ethernet Ports 4, USB Port, Reset Switch, Power Port, the Modem Router.
View all Actiontec V1000H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Wireless VDSL Modem Router Line Port The Line port is used to connect the Modem Router to a telephone line connection. HPNA Port The HPNA port is used to connect the Modem Router to an HPNA connection via coaxial cable. LAN Ethernet Ports (4) The LAN Ethernet ports are used to connect computers to the Modem Router via Ethernet cable. The Ethernet ports are 10/100/1000 Mbps auto-sensing ports, and either a straight-through or crossover Ethernet cable can be used when connecting to the ports. WAN Ethernet Port The WAN Ethernet port is used to connect the Modem Router to a WAN via an Ethernet cable. USB Port The USB port is used to connect the Modem Router to a USB device. This port is not yet active; it may be activated in a future firmware update. Reset Switch Depressing the Reset switch for one second will restore the Modem Router's factory default settings. To reset the Modem Router, depress and hold the Reset switch for approximately ten seconds. The reset process will start after releasing the switch. Power Port The Power port is used to connect the Power cord to the Modem Router. WARNING! Do not unplug the Power cord from the Modem Router during the reset process. Doing so may result in permanent damage to the Modem Router. 6