Adaptec SC4100 User Guide - Page 52
SATA I/O Module Configuration, Drive Carrier LEDs
UPC - 760884147078
View all Adaptec SC4100 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
SATA Storage Enclosures (FS4100 and FS4500) Table 5-4 FS4500 I/O Module LEDs LED Designation D7a Partner Failed LED On Partner controller has failed D8-1 Cache/BBU Fault ■ Data in cache memory ■ Cache memory failed ■ Cache being held by battery back-up ■ Battery not capable of sustaining memory ■ Battery not present a In single controller configurations, this LED is not used. LED Off Partner controller operating properly Battery back-up is capable of sustaining memory in case of power loss (has 87% or more original charge capacity) SATA I/O Module Configuration This section describes how to configure the two I/O modules. FS4100 I/O Module Configuration The Adaptec FS4100 I/O module supports JBOD and does not require configuring. FS4500 I/O Module Configuration Use the Spheras RAIDWatch software application included on your Adaptec Storage Enclosure CD to configure the Adaptec FS4500 I/O module. Refer to the Adaptec Storage Enclosure CD for software documentation. Drive Carrier LEDs Each drive carrier has three LEDs that are visible from the front of the Storage Enclosure. See Drive Carrier LEDs on page 3-3 for detailed information about LED functions. 5-7