Alesis Coda User Guide - Page 15

Setting the Scale Tuning System Type and Root Note 1. Press and hold Shift button, then press the Scale button to enter Scale Mode. 2. Press and hold the Shift button, then use the keys marked Scale Type +/- to select the desired scale type. 
 3. Press and hold the Shift button, then use the keys marked Scale Root +/- to select the desired scale root. 
 4. Press and hold Shift button, then press the Scale button to exit Scale Mode. Parameter 1 2 3 4 5 6 Scale Type Pythagorean Pure Major Pure Minor Meantone Werckmeister Kirnberger Troubleshooting Problem The speakers produce a "pop" sound when the power is turned on or off. The piano is turned on, but no sound is produced when the keys are played. Solution This is normal and no cause for alarm. Make sure the volume is set to an appropriate level. Check that headphones are not connected to the Phones 2 jack. Using a mobile phone produces noise in the piano sound. Using a mobile phone in close proximity to the piano may produce interference. To prevent this, turn off the mobile phone or use it far away from the piano. The wrong notes sound when the keys are played. Make sure the Tune setting is set to 0. Press and hold the +/Yes and -/No buttons simultaneously, and then turn the piano on to revert the settings back to factory defaults. After connecting with the computer, the piano is not recognized. Make sure the USB cable is connected properly, or try to connect it to a different USB port on your computer. 15