Alesis MultiMix 16 USB FX User Guide - Page 7

TOP PANEL FEATURES 11 11 11 11 11 11 11 11 8 6 4 3 9 10 8743 12 12 12 12 12 12 12 12 13 13 13 13 13 13 13 13 11 11 11 11 5 14 14 14 14 14 14 14 14 11 11 11 11 39 16 16 16 16 16 16 16 16 26 26 26 26 15 25 25 25 25 26 26 26 26 34 36 35 38 30 24 24 24 24 24 24 24 24 26 26 26 26 32 23 23 23 23 23 23 23 23 23 23 23 23 31 28 28 28 28 28 28 28 28 28 28 28 28 28 29 29 29 29 29 29 29 29 29 29 29 29 27 27 27 27 27 27 27 27 27 27 27 27 26 21 21 21 21 21 21 21 21 22 22 22 22 1 2 19 2019 2019 2019 2019 2019 2019 2019 2019 2019 2019 19 20 20 33 18 18 18 18 18 18 18 18 18 18 18 18 17 17 17 17 17 17 17 17 17 17 17 17 37 1. POWER LED - Illuminates when the MultiMix 16 USB FX is on. 2. PHANTOM POWER LED - Illuminates when phantom power is engaged. 3. MAIN OUT - Use standard 1/4" cables to connect this output to the house speaker or amplifier system. The level of this output is controlled by the MAIN VOLUME knob. 4. MONITOR OUT - Use standard 1/4" cables to connect this output to your monitor speaker or amplifier system. The level of this output is controlled by the MONITOR VOLUME knob. 5. PHONES - Connect your 1/4" headphones to this output. The PHONES knob controls volume. 6. FX SEND - You may connect the input of an external device (usually an outboard effects device) to this output with a 1/4" mono cable. This output can also be used to create a custom monitor mix for onstage musicians. You can adjust the level with the AUX PRE SEND knob. 7. AUX SEND - You may connect the input of an external device (usually an outboard effects device) to this output with a 1/4" mono cable. This output can also be used to create a custom monitor mix for onstage musicians. You can adjust the level with the AUX PRE knob. 8. AUX RETURN INPUTS - You may connect the outputs of an external device to these inputs with 1/4" mono cables. This is usually used for outboard effects devices but can also be used like an extra input channel for synthesizers, drum machines, etc. If your source is mono, plug it into the left jack and it will be heard on both the left and right sides. 9. 2 TRACK INPUTS - You may connect the outputs of an external recording device to these inputs using standard RCA cables. This can be used to listen to a 2-track recording you've just made, or to connect to a personal media player to play pre-recorded music before your live gig. Press the 2 TRKS/USB TO MONITOR button to hear this in your headphones or monitor speakers. Press the 2 TRKS/USB TO MAIN to hear this in the house speakers. 10. 2 TRACK OUTPUTS - You may connect an external recording device to these outputs using standard RCA cables. 11. MIC INPUT - Connect a microphone to these inputs with an XLR cable. 12. LINE INPUT - Connect line-level devices to these inputs with 1/4" cables. 13. INSERT - The insert jack allows you to insert a compressor, EQ, or any other signal processor in between the MultiMix 16 USB FX's preamplifier and A/D converter. Use a standard 1/4" TRS cable when connecting a device to this insert. 14. LO CUT SWITCH - When this button is depressed, the channel's high-pass filter will engage, reducing frequencies below 80 Hz to When using LINE INPUTS 9-16 and the AUX RETURNS: • If only the left channel is used, the signal will be heard in both left and right channels and the balance will not be adjustable. • If only the right channel is used, the signal will be heard in the right channel only. reduce any low-level noise. 7