Alesis Vortex Wireless 2 Vortex Wireless 2 Editor - User Guide - Page 9
Touch Ribbon, Touch Ribbon Settings, Bank 1/2/3 - presets
View all Alesis Vortex Wireless 2 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 9 highlights
Touch Ribbon Click the Touch Ribbon tab to set the MIDI assignments for Vortex Wireless 2's ribbon controller. Touch Ribbon Settings Default Bank: Click this menu to set the Default Bank when the preset is selected. Select Bank 1, Bank 2, or Bank 3. Release Mode: Click this menu to select one of the following options. • Latch: The ribbon controller will not send additional MIDI messages when you release it, which is useful for changing modulation parameters. • Return: The ribbon controller will send the default MIDI message for the controller when you release it, which is useful for changing parameters like pitch bend. Bank 1/2/3 Type: Click this menu and select one of the following options. • CC: The ribbon controller will send Control Change MIDI messages. • Pitch Bend: The ribbon controller will send Pitch Bend MIDI messages. MIDI Channel: The ribbon controller will send its MIDI messages over this channel. Click this menu and select Channel 1 - Channel 16. CC #: When Type is set to CC, the ribbon controller will send its MIDI messages using this CC number. Click it and enter a number (0-127). Min: This will be the lowest value that the ribbon controller can send. Click it and enter a number (0-127). Max: This will be the highest value that the ribbon controller can send. Click it and enter a number (0-127). 9