Alpine CDE-136BT Owner's Manual (english) - Page 18

Using the Front AUX Input Terminal Connect a portable music player, etc. by simply connecting it to the input on the front panel. An optional adapter cable is required (standard RCA to 3.5ø mini-phono plug or 3.5ø to 3.5ø mini phono plug). Press SOURCE, and select the AUXILIARY mode to listen to the portable device. Portable player, etc. Main unit SETUP AUDIO/SETUP  Rotary encoder//ENTER  or Optional adapter cable (RCA pin plugs [red, white] 3.5ø miniplugs) or (3.5ø miniplugs). Notes • This function is available only when AUX SETUP is set to ON. For details, refer to "Setting the AUX SETUP Mode" on page 19. • Do not connect a Flash Memory Device and an AUX Input Terminal connector at the same time. Setting You can customize the unit to suit your own preferences and usage. From the SETUP menu, GENERAL Setting, DISPLAY Setting, etc., can be modified. Use steps 1 to 5 to select one of the SETUP modes to modify. See the applicable section below for details about the selected SETUP item. 1 Press and hold AUDIOSETUP for at least 2 seconds to activate the SETUP mode. 2 Turn the Rotary encoder to select the desired item, and then press ENTER. BLUETOOTH*1  GENERAL  AUDIO*2  DISPLAY  iPod & USB (e.g. Select GENERAL) GENERAL: CLOCK ADJ*3  PLAY MODE  AUX SETUP  AUX NAME*4  AUX GAIN*4  POWER IC  DEMO DISPLAY: DIMMER  SCROLLTYPE  TEXT SCR iPod & USB: USB SEARCH  USB SKIP  PANDORA  PANDORA VL*5 *1 Refer to "BLUETOOTH SETUP" on page 21. *2 Refer to "Sound Setting" on page 14. *3 Refer to "Setting the Time" on page 10. *4 Displayed only when AUX SETUP is set to ON. *5 Displayed only when PANDORA is set to ON. 3 Select an Item with the Rotary encoder, and then press ENTER. (e.g. Select POWER IC) 4 Turn the Rotary encoder to change the setting, and then press ENTER. (e.g. Select POWER IC ON or POWER IC OFF.) 5 Press and hold AUDIOSETUP for at least 2 seconds to return to normal mode. Notes • Press  to return to the previous mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. 18-EN