Alpine CDE-136BT Owner's Manual (english) - Page 19

General Setting GENERAL is selected on the setup main menu in step 2. Playing MP3 Data (PLAY MODE) This unit can play back CDs containing both CD and MP3 data (created in Enhanced CD (CD Extra) format). However, in some situations, playback of an enhanced CD may be difficult. In this case, you can choose to play back the CD data session only. When a disc contains both CD and MP3 data, playback starts from the CD data portion of the disc.  Setting item: PLAY MODE Setting contents: CD-DA (Initial setting) / CDDA/MP3 CD-DA: Only the CD data in Session 1 can be played back. CDDA/MP3: CD data, MP3 files in mixed mode, and multi-session discs can be played back. Note • Perform this setting before inserting a disc. If a disc has already been inserted, remove it first. Setting the AUX SETUP Mode You can input the audio of an external device, (such as a Portable audio player) to the AUX connector of this unit.  Setting item: AUX SETUP Setting contents: ON (Initial setting) / OFF ON*: Set to ON when a portable device is connected. If SOURCE is pressed and AUX is selected, the sound of the portable device is input to the unit. * You can change the AUX NAME display when AUX SETUP is set to ON. Press ENTER when AUX SETUP is set to ON, and select AUX NAME by turning the Rotary encoder, then press ENTER. After that, turn the Rotary encoder to select the desired AUX NAME. Note • When the PORTABLE is set, PMD is displayed on the unit. OFF: When set to OFF, AUX source cannot be selected. Setting the AUX Level (AUX GAIN) After setting to ON in "Setting the AUX SETUP Mode", this setting can be carried out.  Setting item: AUX GAIN Setting contents: LOW (Initial setting) / HIGH LOW: Decreases the external input audio level. HIGH: Increases the external input audio level. Connecting to an External Amplifier (POWER IC) When an external amplifier is connected, sound quality can be improved by reducing the current draw of the built-in amplifier.  Setting item: POWER IC Setting contents: ON (Initial setting) / OFF ON: The speakers are driven by the built-in amplifier. OFF: Use this mode when the line output of this unit is used to drive an external amplifier. In this setting, the head unit's internal amplifier is turned OFF and cannot drive speakers. ON: SPEAKER RIGHT FRONT Speakers Front Right SPEAKER RIGHT REAR SPEAKER LEFT REAR Rear Right Rear Left SPEAKER LEFT FRONT Front Left OFF: Amplifier Amplifier Front Left Front Right Rear Left Rear Right Note • No sound is produced by the system when the power output is set to OFF. Demonstration This unit has a demonstration feature for the display.  Setting item: DEMO Setting contents: DEMO ON / DEMO OFF (Initial setting) Note • To quit Demo mode, set to DEMO OFF. 19-EN