Alpine CDE-136BT Owner's Manual (english) - Page 22

3 Turn the Rotary encoder to select the desired items and then press ENTER. BLUETOOTH: BT IN*1  PAIRED DEV  VISIBLE M*1  SEARCH DEV*1  CALL SOUND*2  CALLER ID*2  PB UPDATE*2  PB ORDER*2  AUTO ANS*2  SEV NAME*2  SPEAKER SL*2  FW VERSION  FW UPDATE*1 *1 The items are not displayed during a phone call. *2 The items are not displayed when "HFP" is set to OFF. Refer to "Setting the BLUETOOTH Connection (BT IN)" on page 22. 4 Turn the Rotary encoder to change the settings. 5 Press and hold AUDIOSETUP for at least 2 seconds. The SETUP mode is canceled. Notes • Press  to return to the previous mode. • Pressing and holding  for at least 2 seconds will return to normal mode. • If no operation is performed for 60 seconds, the unit will return to normal mode automatically. Setting the BLUETOOTH Connection (BT IN) With BLUETOOTH technology, you can place a hands-free call by a BLUETOOTH-equipped mobile phone. Audio information of a BLUETOOTH compatible mobile phone, a portable audio player, etc., is controllable/playable wirelessly from this unit.  Setting item: BT IN  Further setting items: HFP / AUDIO Setting contents: OFF / ON (Initial setting) Hands-Free Phone setting (HFP) ON: Select when you want to pair your BLUETOOTH compatible phone with this unit. OFF: Hands-Free Phone function is not used. BLUETOOTH Audio setting (AUDIO) ON: Select when you want to use BLUETOOTH Audio function. OFF: BLUETOOTH Audio function is not used. Setting the BLUETOOTH Device Select one of 3 connected BLUETOOTH compatible devices that you previously registered.  Setting item: PAIRED DEV 1 Turn the Rotary encoder to select a BLUETOOTH compatible device you want to use (you want to change connection) and then press ENTER. 2 Turn the Rotary encoder to select "CONNECT" to connect the selected device. The connected device is marked with "l". Select "DISCONNECT" to disconnect this device. Select "CLEAR" when you want to clear the device from the device list. Notes • If the connection is successfully changed, "CONNECTED" is displayed for 2 seconds and the  indicator lights up, then the display returns to the SETUP screen. • If all the 3 positions have been registered, you cannot register the 4th device. To register another device, you need to delete one of the devices from position 1 to 3 first. Setting the Visible Mode You can set whether this unit can be recognized or not from a BLUETOOTH compatible device. Normally set this to VISI M ON.  Setting item: VISIBLE M Setting contents: VISI M OFF / VISI M ON (Initial setting) VISI M OFF: Disable recognition of this unit from the BLUETOOTH compatible device. VISI M ON: Enable recognition of this unit from the BLUETOOTH compatible device. Pairing a BLUETOOTH Device from the unit If your BLUETOOTH device is not immediately pairing, the head unit can perform a search. The search can find paired or unpaired devices.  Setting item: SEARCH DEV 1 When SEARCH DEV is selected, and "SEARCHING" is displayed, the search gets started. Note • The "SEARCHING" operation can be stopped by pressing . 2 Turn the Rotary encoder to select the name of the device to be connected from the Device Search list and then press ENTER. 3 If this unit is successfully connected to a BLUETOOTH compatible device, "CONNECTED" is displayed, and then the unit returns to normal mode. Depending on the mobile phone, it may be necessary to input a passcode. In this case, "CODE 0000" is displayed. Input the passcode "0000" in the BLUETOOTH compatible device to make the pairing. After the pairing is completed, the unit will automatically connect to the BLUETOOTH compatible device. If you input the wrong passcode or the communication fails, "FAILED" is displayed. 22-EN