Alpine X409-WRA-JK Installation Manual EN

Alpine X409-WRA-JK Manual

Get Alpine X409-WRA-JK PDF manuals and user guides View all Alpine X409-WRA-JK manuals
Add to My Manuals
Save this manual to your list of manuals

Alpine X409-WRA-JK manual content summary:

  • Alpine X409-WRA-JK | Installation Manual EN - Page 1
    lead to electric shock, injury or damage to equipment. Introduction ˜ Congratulations on purchasing the X409-WRA-JK. This installation manual is designed to take you through the step-by-step installation of the X409-WRA-JK into a 2011-2018 Jeep Wrangler. Please familiarize yourself with the owners
  • Alpine X409-WRA-JK | Installation Manual EN - Page 2
    that are forbidden (must not be performed) Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 2/21 When making a hole in the vehicle according to the instructions, and attach them securely. Failing to do so could lead to an accident or damage equipment. Forbidden Do not install the product where it
  • Alpine X409-WRA-JK | Installation Manual EN - Page 3
    Panel Removing Tool 10mm Sockets Wire Cutters Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 3/21 7mm Sockets #2 Phillips Screwdriver Extension Ratchet Air Saw T20 Torx Digital Multimeter Accessory List Installation Kit Parts X409-WRA-JK Radio Dash Bezel MENU Key Harness Side Mounting Brackets
  • Alpine X409-WRA-JK | Installation Manual EN - Page 4
    Head Unit Box Parts (X409) X409 Display Unit Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 4/21 X409 Source Unit USB Extension Cable AUX/Pre Out Harness Direct Camera Adapter Anti-Vibration Foam GPS Antenna Documents Display Cable OM QR Card Alpine QRG Navigation Registration Card Display
  • Alpine X409-WRA-JK | Installation Manual EN - Page 5
    X409-WRA-JK 20201016v1 ˜ 5/21 Programming the iDatalink Maestro Module 1 INSTALL THE WEBLINK PLUG-IN Go to: idatalinkmaestro.com/plugin and follow the installation head units label, underneath the bar code. Review the System Requirements before installing. 2 REGISTER A WEBLINK ACCOUNT Go to:
  • Alpine X409-WRA-JK | Installation Manual EN - Page 6
    X409-WRA-JK 20201016v1 ˜ 6/21 Component Locations IMPORTANT: Follow the recommended component location shown below. Failure to do so, will result in poor GPS performance. Add-on Microphone iDatalink Maestro Module SiriusXM Tuner (Sold Separately) Jeep Jeep SINCE 1941 GPS Antenna Installation
  • Alpine X409-WRA-JK | Installation Manual EN - Page 7
    FAILURE TO DO SO WILL DISABLE MANY FEATURES. 1 Remove the rubber cover from the top center storage area and extract (1) 7mm screw. Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 7/21 2 Remove the knee cover panel and extract (2) 7mm screws located to the right and left sides of the steering wheel column
  • Alpine X409-WRA-JK | Installation Manual EN - Page 8
    Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 8/21 Installation Instructions 1 The factory dash panel needs to be trimmed to allow the new X409-WRA-JK bezel to fit into place. Remove the highlighted area by cutting along the dashed line. 2 Remove the vents from the radio section on the OEM
  • Alpine X409-WRA-JK | Installation Manual EN - Page 9
    Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 9/21 Installation Instructions DISCONNECT THE BATTERY BEFORE CONTINUING. FAILURE TO DO SO WILL DISABLE MANY FEATURES. 1 Attach the modified panel using the factory screws. 2 Put monitor face down
  • Alpine X409-WRA-JK | Installation Manual EN - Page 10
    Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 10/21 Removing the Uconnect® (only for vehicles with simultaneously resulting in unpredictable and potentially distracting behavior. The feature is not retained by the X409 and the OEM USB should not be used. Connecting A SiriusXM Module (Sold Separately)
  • Alpine X409-WRA-JK | Installation Manual EN - Page 11
    Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 11/21 Mounting Brackets DISCONNECT THE BATTERY BEFORE 1mm tolerance to the mounting brackets to compensate for such variance in mounting tolerance. Use the guides below as reference if there are any required adjustments. Adjust the rear bracket as needed when
  • Alpine X409-WRA-JK | Installation Manual EN - Page 12
    Bezel Wiring Diagram 8 Pin Harness Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 12/21 20 Pin Harness (Connect to X409) 8 Pin Harness
  • Alpine X409-WRA-JK | Installation Manual EN - Page 13
    X409-WRA-JK 20201016v1 ˜ 13/21 X409-WRA-JK 001 see page 19 MANUAL TRANSMISSION VEHICLES White/Gray Manual Transmission Reverse Input For manual transmission vehicles ONLY. using HCE-TCAM1-WRA WARNING! see page 18 The use of this connection is intended for Alpine HCE-TCAM1-WRA rear view camera
  • Alpine X409-WRA-JK | Installation Manual EN - Page 14
    . This port is meant for Apple CarPlay, Android Auto, and USB ash drives. X409-WRA-JK Source Unit For all phones the USB power source needs to be a 2A source. This will require a separate USB power source to be installed in the vehicle. CAN I/F USB GPS HDMI IN Do not use the head unit
  • Alpine X409-WRA-JK | Installation Manual EN - Page 15
    (Brown) REMOTE IN (Brown/White) REMOTE OUT (Brown) DVD STATUS IN (Red/White) STEERING REMOTE MIC IN SUBW FRONT OUT REAR OUT Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 15/21 To SiriusXM Tuner Vehicle Antenna GPS Antenna (Included) To the vehicle speed pulse line To Front, Rear or Side camera To
  • Alpine X409-WRA-JK | Installation Manual EN - Page 16
    Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 16/21 Wire Harness Pin Outs Radio Main 8 16 7 15 6 14 5 13 4 12 3 11 2 10 19 Blue 22AWG Red 20AWG Blue/White 22AWG Orange/
  • Alpine X409-WRA-JK | Installation Manual EN - Page 17
    View Camera Rear View Camera 6-pin Black Connector WARNING! The use of this connection is intended for Alpine HCE-TCAM1-WRA rear view camera ONLY. Connection Of An External Amplifier X409-WRA-JK Source Unit CAN I/F USB GPS SXM/DAB HDMI IN HDMI OUT PRE OUT W.REMOTE POWER ANTENNA SUBW
  • Alpine X409-WRA-JK | Installation Manual EN - Page 18
    Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 18/21 Connection Of KAC-001 KAC- Connect to IDATALINK I/F cable from head unit. This is the 4 pin data connector shown on page 12 in the installation diagram that comes directly off of the main harness Output 1 (Purple) Output 2 (White/Red) Output 3 (Brown
  • Alpine X409-WRA-JK | Installation Manual EN - Page 19
    Steering Wheel Configuration Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 19/21 Factory Option Phone Voice VR Seek Up Preset Up Seek Down Volume Up Source Volume Down Button Volume Up Volume Down Seek
  • Alpine X409-WRA-JK | Installation Manual EN - Page 20
    Guide Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 20/21 1 Turn the vehicle's Ignition switch to ACC. 2 Turn ON the X409-WRA-JK VEHICLE INFO/GAUGES/CAR SETTINGS). Troubleshooting Guide Symptom 1 iPhone not working same. Do not plug into the USB from the Alpine head unit. A third party USB adapter will
  • Alpine X409-WRA-JK | Installation Manual EN - Page 21
    Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 21/21 Troubleshooting Guide Continued Symptom Possible Cause Remedy 5 Incorrect the parking brake and engage the parking brake a second time, as shown in the Setup Guide on page 20. 8 Only the front speakers are on for SXM Radio. SXM Tuner has not
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
Jeep Wrangler
X409-WRA-JK
20201016v1
±
1/21
Jeep Wrangler
X409-WRA-JK
9” Restyle Installation Manual
±
Model: Wrangler JK
±
Model Year: 2011-2018
Note:
±
Design and specifications are subject to change without notice for improvement.
To Ensure Safe Use, Always Follow These Precautions
±
The installation of this product requires specialized skills and experience. We recommend that you have the
product installed by an Alpine authorized dealer.
±
Before you use this product, be sure to carefully read this installation manual and the separate user's manual
so that you can use the product correctly. Alpine Electronics bears no responsibility for problems that arise as
a result of failure to follow the instructions in the manuals.
±
This manual includes a number of symbols that are intended to help you use the product safely, to prevent
harm to you and others, and to protect against damage to property. These symbols and their meanings are
listed below. Make sure you fully understand these symbols before you begin reading the main text.
Explanations of Injury and Damage That May Result from Incorrect Use
Warning
Ignoring the content marked by this indication and using the product incorrectly is
expected to lead to death or serious injury.
Caution
Ignoring the content marked by this indication and using the product incorrectly is only
expected to lead to injury or property damage.
Jeep
Model
Year
Wrangler JK
2011 - 2018
* The specified vehicles have been tested and have met compatibility specs at the time of testing. Compatibility is
not guaranteed if the manufacturer has made production changes to the listed vehicles above.
Warning: Before you begin wiring, remove the ground wire from the negative
terminal of the battery. Failing to do so can lead to electric shock, injury or damage
to equipment.
Introduction
±
Congratulations on purchasing the X409-WRA-JK. This installation manual is designed to take you through the
step-by-step installation of the X409-WRA-JK into a 2011-2018 Jeep Wrangler. Please familiarize yourself with
the owners manual and if you still have additional questions please call 1-800-TECH-101.