Alpine X409-WRA-JK Installation Manual EN - Page 10

Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 10/21 Removing the Uconnect® (only for vehicles with factory Uconnect®) 1 Remove the factory climate control panel. It is clipped on and can be removed with a panel removing tool. Extract the (2) 7mm bolts from Uconnect® module. 2 Disconnect the 24pin OEM connector. 3 Secure the Uconnect® module to the original location using the 7mm bolts. 4. NOTE: If Uconnect® module is not disconnected the Uconnect® system will stay paired with previously paired phones. The user's phone may connect to both Bluetooth devices simultaneously resulting in unpredictable and potentially distracting behavior. The feature is not retained by the X409 and the OEM USB should not be used. Connecting A SiriusXM Module (Sold Separately) CAN I/F GPS SXM/DAB USB HDMI IN HDMI OUT PRE OUT W. REMOTE POWER There is no way to integrate the factory SiriusXM tuner. Once the radio is removed, the factory SiriusXM is removed. As the title states, SiriusXM requires a tuner sold separately. This diagram shows how to integrate the antenna connection. For vehicles with factory SiriusXM connect the adapter to the factory SiriusXM antenna in the radio cavity. The factory SiriusXM antenna is located on the passenger side B-pillar. For vehicles without factory SiriusXM use the antenna that is included with the SXV300 SiriusXM Tuner. SiriusXm connect