Alpine X409-WRA-JK Installation Manual EN - Page 18

Jeep Wrangler X409-WRA-JK 20201016v1 ˜ 18/21 Connection Of KAC-001 KAC-001 Side View POWER RESET HEADUNIT CAN OUTPUT UPDATE Reset Button USB port (Firmware updates only) Power Harness (3-pin White) Interface Harness (4-pin White) Interface Cable (4-pin) (included with ADS module) 8ch Output Harness (24-pin White) BATT* (Yellow) ACC (Red) GND (Black) *Fuse Rating: 7A Connect to IDATALINK I/F cable from head unit. This is the 4 pin data connector shown on page 12 in the installation diagram that comes directly off of the main harness Output 1 (Purple) Output 2 (White/Red) Output 3 (Brown) Output 4 (Blue) Output 5 (Green) Output 6 (Pink) Output 7 (White) Output 8 (Gray) Connect to Relay/output to accessories (Sold separately) To 4 Pin Black Data Maestro Module Side View 3 Pin Black 4 Pin Blue 10 Pin Green 3 Pin 4 Pin Black Black Data Not Used Main Harness To Head Unit