Amana ART318FFDW Installation Instructions - Page 18
Final Installation
View all Amana ART318FFDW manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Final Installation Installing the access cover and forming the copper tubing 1. Top freezer models only: Add grommet to condenser to avoid contact between valve and condenser area. 3. Loop the copper tubing coming from the water valve as shown. Position the coiled copper tubing near the center of the unit so that it forms an "accordion-fold" (as shown in the diagram below) when it is moved to and from the wall. Grommet 2. Reinstall the rear access cover on the refrigerator so the water valve tubing is inside the cover, and the copper water line is outside (see the diagram below), then secure the cover with the hex-head screws you removed earlier. NOTE: For side by side models, gently route the plastic tubing through the slot in the metal access cover. Form tubing loops as shown Hex-head screws Rear access cover Copper tubing Place water valve tubing behind cover Hex-head screws Installing the access cover and forming the copper tubing 18