Apple M8493 Setup Guide - Page 69
If you removed a card from your computer and did not install a replacement
![]() |
UPC - 718103028325
View all Apple M8493 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
Press the card gently but firmly until the connector is fully inserted. m Don't rock the card from side to side; instead, press the card straight into the slot. m Don't force the card. If you meet a lot of resistance, pull the card out. Check the connector and the slot for damage or obstructions, then try inserting the card again. m Pull the card gently to see if it is properly connected. If it resists and stays in place, and if its gold connectors are barely visible, the card is connected. 4 Reinsert the port access cover screw and tighten it to hold the card in place. Warning If you removed a card from your computer and did not install a replacement, be sure to place a port access cover over the empty slot. Do not leave an empty slot without a cover. An uncovered slot can affect the air flow that cools the computer's internal components and cause damage. 5 Close the computer. Working Inside Your Computer 69
![](/manual_guide/products/apple-m8493-setup-guide-57c78d4/69.png)