Ariens Zoom 42 Owners Manual - Page 12

Check Engine Oil Level, Check Tire Pressure, Level Mower Deck, Fill Fuel Tank

Page 12 highlights

Check Engine Oil Level Refer to Engine Manual. Check Tire Pressure CAUTION: Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly: • Do not attempt to mount a tire without the proper equipment and experience to perform the job. • Do not inflate the tires above the recommended pressure. • Do not weld or heat a wheel and tire assembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or deform the wheel. • Do not stand in front or over the tire assembly when inflating. Use a clip-on chuck and extension hose long enough to allow you to stand to one side. See "SPECIFICATIONS" on page 35. Level Mower Deck See "LEVELING AND ADJUSTING PITCH OF MOWER DECK" on page 23. Fill Fuel Tank Fill fuel tank. DO NOT OVERFILL! See "FILLING FUEL TANK" on page 18. Check Safety Interlock System WARNING: Safety interlock failure and improper operation of unit can result in death or serious injury. Check system before each use to make sure it is functioning properly. See "Safety Interlock System" on page 15. Check function of all controls See "OPERATION" on page 15. GB - 12

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40

GB - 12
Check Engine Oil Level
Refer to Engine Manual.
Check Tire Pressure
See "SPECIFICATIONS" on page 35.
Level Mower Deck
See “LEVELING AND ADJUSTING PITCH
OF MOWER DECK” on page 23.
Fill Fuel Tank
Fill fuel tank. DO NOT OVERFILL! See
"FILLING FUEL TANK" on page 18.
Check Safety Interlock System
See "Safety Interlock System" on page 15.
Check function of all controls
See "OPERATION" on page 15.
CAUTION:
Avoid injury!
Explosive separation of tire and
rim parts is possible when they
are serviced incorrectly:
Do not attempt to mount a tire
without the proper equipment
and experience to perform the
job.
Do not inflate the tires above
the recommended pressure.
Do not weld or heat a wheel
and tire assembly. Heat can
cause an increase in air
pressure resulting in an
explosion. Welding can
structurally weaken or deform
the wheel.
Do not stand in front or over
the tire assembly when
inflating. Use a clip-on chuck
and extension hose long
enough to allow you to stand
to one side.
WARNING:
Safety interlock
failure and improper operation of
unit can result in death or serious
injury. Check system before each
use to make sure it is functioning
properly.