Ariens Zoom 42 Owners Manual - Page 20

Interval Task Action Check Safety Interlock System WARNING: Safety interlock system failure and improper operation of unit can result in death or serious injury. Test this system each time the unit is operated. If this system does not function as described, do not operate until repairs are made. See "Safety Interlock System" on page 15. Check Parking Brake Engage parking brake and engage transmission bypass lever. See "MOVING UNIT MANUALLY" on page 20. Push unit. If unit rolls, contact your Ariens dealer. Clean Unit Clean engine, battery, seat, etc. of all dirt and debris. Do not use solvents, hard cleaners, or abrasives. For deck cleaning instructions see "Washout Port" on page 17. NOTE: Protect painted surfaces with automotive type wax. IMPORTANT: Do not spray the unit with water, especially when the unit is warm from operation. Check Tires See "SPECIFICATIONS" on page 35 for correct tire pressure. CAUTION: Avoid injury! Explosive separation of tire and rim parts is possible when they are serviced incorrectly: Each Use • Do not attempt to mount a tire without the proper equipment and experience to perform the job. • Do not inflate the tires above the recommended pressure. • Do not weld or heat a wheel and tire assembly. Heat can cause an increase in air pressure resulting in an explosion. Welding can structurally weaken or deform the wheel. • Do not stand in front or over the tire assembly when inflating. Use a clip-on chuck and extension hose long enough to allow you to stand to one side. Check Mower Blades Check for worn or damaged mower blades. See "SHARPENING MOWER BLADE" on page 25. Follow Engine Manual Maintenance Schedule Perform scheduled engine maintenance. Refer to Engine Manual for detailed instructions. NOTE: To drain the oil, remove oil drain cap and attach the oil drain hose, supplied in the lit pack, to the drain plug. Rotate the drain to the left to allow oil to drain. Turn the drain to the right to close. Oil Drain Plug GB - 20