Asus CUWE-RM CUWE-RM User Manual - Page 22

ASUS CUWE-RM User's Manual, CPU External Frequency Setting DSW, IMPORTANT, CPU Speed, Core:Bus Freq

Get Asus CUWE-RM PDF manuals and user guides View all Asus CUWE-RM manuals
Add to My Manuals
Save this manual to your list of manuals

Page 22 highlights

3. H/W SETUP Motherboard Settings 3. HARDWARE SETUP 8) CPU External Frequency Setting (DSW) This option tells the clock generator what frequency to send to the CPU, DRAM, and the PCI bus. This allows the selection of the CPU's External frequency. The CPU External Frequency multiplied by the Frequency Multiple equals the CPU's Internal frequency (the advertised CPU speed). NOTE: You may set the memory speed independently from the CPU External Frequency. Depending on your memory type, select the appropriate "SDRAM" speed along with the appropriate "CPU" speed. IMPORTANT: When JumperFree mode is enabled, use BIOS setup in place of these switches (see CPU Speed in 4.4 Advanced Menu). Only selected switches are illustrated, see the next page for a complete frequency listing. NOTE: In JumperFree mode, all DIP switches (DSW) must be set to OFF. DSW ON ON ON 12345 CPU → 66MHz SDRAM → 100MHz ON 12345 70MHz 105MHz ON 12345 75MHz 112MHz ON 12345 CPU → 85MHz SDRAM → 128MHz ON 12345 100MHz 100MHz ON 12345 105MHz 105MHz ON 12345 CPU → 112MHz SDRAM → 112MHz 12345 124MHz 124MHz 12345 133MHz 133MHz CUWE-RM ON ON ON ® 12345 CPU → 133MHz SDRAM → 100MHz CUWE-RM CPU External Clock ON Frequency Selection 12345 140MHz 105MHz 12345 149MHz 112MHz 12345 CPU → 166MHz SDRAM → 125MHz (JumperFree Mode) NOTE: Frequency Multiple settings are not available here because usually Socket 370 processors have locked Frequency Multiples. If your Socket 370 processor does not have a locked Frequency Multiple, you must use CPU Core:Bus Freq. Multiple in 4.4 Advanced Menu of the BIOS setup to set the Frequency Multiple. If the Frequency Multiple is locked, setting the Frequency Multiple in BIOS setup will have no effect. WARNING! CPU frequencies above 66MHz exceed the specifications for current Celeron processors and are not guaranteed to be stable. For Coppermine processors, CPU frequencies other than the recommended bus frequencies are not guaranteed to be stable. Premature wearing of the processor may result when overclocking. Be sure that the DIMM you use can handle the specified SDRAM MHz or else bootup will not be possible. 22 ASUS CUWE-RM User's Manual

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
22
ASUS CUWE-RM User’s Manual
3. HARDWARE SETUP
8)
CPU External Frequency Setting (DSW)
This option tells the clock generator what frequency to send to the CPU, DRAM,
and the PCI bus. This allows the selection of the CPU’s
External
frequency. The
CPU External Frequency multiplied by the Frequency Multiple equals the CPU’s
Internal
frequency (the advertised CPU speed).
NOTE:
You may set the memory
speed independently from the CPU External Frequency. Depending on your
memory type, select the appropriate “SDRAM” speed along with the appropri-
ate “CPU” speed.
IMPORTANT:
When JumperFree mode is enabled, use BIOS setup in place of
these switches (see
CPU Speed
in
4.4 Advanced Menu
). Only selected switches
are illustrated, see the next page for a complete frequency listing.
NOTE:
In JumperFree mode, all DIP switches (DSW) must be set to OFF.
®
CUWE-RM
CUWE-RM CPU External Clock
Frequency Selection
DSW
CPU
SDRAM
→
→
70MHz
105MHz
75MHz
112MHz
66MHz
100MHz
ON
12345
ON
12345
ON
12345
CPU
SDRAM
→
→
100MHz
100MHz
105MHz
105MHz
85MHz
128MHz
ON
12345
ON
12345
ON
12345
CPU
SDRAM
→
→
124MHz
124MHz
133MHz
133MHz
112MHz
112MHz
ON
12345
ON
12345
ON
12345
CPU
SDRAM
→
→
140MHz
105MHz
149MHz
112MHz
133MHz
100MHz
ON
12345
ON
12345
ON
12345
CPU
SDRAM
→
→
166MHz
125MHz
ON
12345
(JumperFree Mode)
NOTE:
Frequency Multiple settings are not available here because usually
Socket 370 processors have locked Frequency Multiples. If your Socket 370
processor does not have a locked Frequency Multiple, you must use
CPU
Core:Bus Freq. Multiple
in
4.4 Advanced Menu
of the BIOS setup to set the
Frequency Multiple. If the Frequency Multiple is locked, setting the Frequency
Multiple in BIOS setup will have no effect.
WARNING!
CPU frequencies above 66MHz exceed the specifications for cur-
rent Celeron processors and are not guaranteed to be stable. For Coppermine pro-
cessors, CPU frequencies other than the recommended bus frequencies are not
guaranteed to be stable. Premature wearing of the processor may result when
overclocking. Be sure that the DIMM you use can handle the specified SDRAM
MHz or else bootup will not be possible.
Motherboard Settings
3. H/W SETUP