Asus CUWE-RM CUWE-RM User Manual - Page 62
Chip Configuration
View all Asus CUWE-RM manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 62 highlights
4. BIOS SETUP 4.4.1 Chip Configuration 4. BIOS SETUP Chip Configuration (scroll down to see more items, as shown here) SDRAM Configuration [By SPD] This sets the optimal timings for items 2-4, depending on the memory modules that you are using. Default setting is [By SPD], which configures items 2-4 by reading the contents in the SPD (Serial Presence Detect) device. The EEPROM on the memory module stores critical parameter information about the module, such as memory type, size, speed, voltage interface, and module banks. Configuration options: [User Define] [7ns (143MHz)] [8ns (125MHz)] [By SPD] SDRAM CAS Latency This controls the latency between the SDRAM read command and the time that the data actually becomes available. NOTE: To make changes to this field, the SDRAM Configuration field must be set to [User Define]. SDRAM RAS to CAS Delay This controls the latency between the SDRAM active command and the read/write command. NOTE: To make changes to this field, the SDRAM Configuration field must be set to [User Define]. 62 ASUS CUWE-RM User's Manual