Asus E500 G5 SFF User Manual - Page 28
Assembly module, 2.6.1 Removing the assembly module
View all Asus E500 G5 SFF manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 28 highlights
2.6 Assembly module Before you can install a 5.25-inch drive, card reader, and 3.5" HDD, you should first remove the front panel cover and assembly module. Ensure to unplug the power cable before installing or removing any system components. Failure to do so may cause damage to the motherboard and other system components! 2.6.1 Removing the assembly module To remove the assembly module: 1. Locate the front panel cover latches and lift both latches gently to remove the front panel cover. 2. Pull the assembly module lock towards the front (A) to release the assembly module from the chassis, then lift the assembly module to remove it (B). 2-10 Chapter 2: Hardware Setup
Chapter 2: Hardware Setup
2-10
2.6
Assembly module
Before you can install a 5.25-inch drive, card reader, and 3.5” HDD, you should first remove
the front panel cover and assembly module.
Ensure to unplug the power cable before installing or removing any system components.
Failure to do so may cause damage to the motherboard and other system components!
2.6.1
Removing the assembly module
To remove the assembly module:
1.
Locate the front panel cover latches and lift both latches gently to remove the front
panel cover.
2.
Pull the assembly module lock towards the front (A) to release the assembly module
from the chassis, then lift the assembly module to remove it (B).