Asus E500 G5 SFF User Manual - Page 30

-inch drive

Get Asus E500 G5 SFF PDF manuals and user guides View all Asus E500 G5 SFF manuals
Add to My Manuals
Save this manual to your list of manuals

Page 30 highlights

2.7 5.25-inch drive To install a 5.25-inch drive to the assembly module: 1. Remove the assembly module from the chassis. Refer to 2.6.1 Removing the assembly module for more information. 2. Insert and carefully push the drive into the bay until its screw holes align with the holes on the bay. 3. Secure the 5.25-inch drive with two (2) screws into the screw holes on the left side of the assembly module. 4. Connect the SATA cable to the SATA connector of the drive. 5. Connect a SATA power cable from the power supply to the power connector of the drive. 6. Reinstall the assembly module and front panel cover. Refer to 2.6.2 Replacing the assembly module and front cover for more information. Screw holes 2-12 Chapter 2: Hardware Setup

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
Chapter 2: Hardware Setup
2-12
4.
Connect the SATA cable to the
SATA connector of the drive.
5.
Connect a SATA power cable from
the power supply to the power
connector of the drive.
6.
Reinstall the assembly module and
front panel cover. Refer to
2.6.2
Replacing the assembly module and
front cover
for more information.
2.7
5.25-inch drive
To install a 5.25-inch drive to the assembly module:
1.
Remove the assembly module from
the chassis. Refer to
2.6.1 Removing
the assembly module
for more
information.
2.
Insert and carefully push the drive
into the bay until its screw holes align
with the holes on the bay.
3.
Secure the 5.25-inch drive with two
(2) screws into the screw holes on
the left side of the assembly module.
Screw holes