Asus ESC1000 User Guide - Page 69
Internal connectors
View all Asus ESC1000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 69 highlights
3.5.4 Internal connectors 1. Intel® X79 Serial ATA 6.0 Gb/s connectors (7-pin SATA6G_1/2 [gray]) These connectors connect to Serial ATA 6.0 Gb/s hard disk drives via Serial ATA 6.0 Gb/s signal cables. ® • These connectors are set to [AHCI Mode] by default. If you intend to create a Serial ATA RAID set using these connectors, set the SATA Mode item in the BIOS to [RAID Mode]. Refer to section 4.5.5 SATA Configuration for details. • Before creating a RAID set, refer to section 5.1 RAID configurations or the manual bundled in the motherboard support DVD. • When using hot-plug and NCQ, set the SATA Mode in the BIOS to [AHCI Mode]. Refer to section 4.5.5 SATA Configuration for details. • You must install Windows® XP Service Pack 3 or later versions before using Serial ATA hard disk drives. The Serial ATA RAID feature is available only if you are using Windows® XP SP3 or later versions. ASUS ESC1000 G2 3-21